Current Date And Time In Brookside, United States
Wednesday, 12 August 2026
03:36:09 PDT
State: Ohio
Currency: United States Dollar (USD)
Timezone: UTC -08:00 (PDT)
Population: 614
District: Belmont County
Explore the interactive satellite map of Brookside, a city in Ohio, United States, located in North America. This page provides precise GPS coordinates, latitude and longitude values, DMS (Degrees Minutes Seconds) and DDM (Degrees Decimal Minutes) formats for Brookside — all essential for geographic navigation, logistics planning, GIS integration and location intelligence workflows. View the live satellite map to explore terrain, streets and urban structure of Brookside.
Professional use cases: Supply chain & logistics routing • Delivery territory mapping • Real estate site analysis • Field operations & fleet management • Market research for regional expansion into North America • GIS platform data integration • Travel planning & proximity analysis • Strategic site selection for United States operations.
| Coordinate Format | Latitude | Longitude |
|---|---|---|
| Decimal Degrees (DD) | 40.0706° N | 80.7609° W |
| Signed Decimal Degrees | 40.0706 | -80.7609 |
| Degrees Minutes Seconds (DMS) | 40° 4' 14" N | 80° 45' 39" W |
| Degrees Decimal Minutes (DDM) | 40° 4.2378' N | 80° 45.6552' W |
| City | Brookside |
| State | Ohio (State of Ohio) |
| Country | United States |
| Continent | North America |
| District | Belmont County |
| Time Zone | -10:00 to -05:00 |
| Population | 614 |
| Area (km²) | 0.46 km² |
| Area (mi²) | 0.18 mi² |
| Pop. Density | 1,334.78 /km² |
| Elevation | 201 m / 659 ft |
| GPS (DD) | 40.0706, -80.7609 |
Straight-line (great-circle) distance from Brookside to each nearby city, calculated using the Haversine formula. Estimated travel time is based on a standard drive speed of 60 km/h. Use this data for delivery routing, courier zoning and last-mile logistics planning around Ohio.
| City | State | Direction | Distance (km) | Distance (mi) | Drive Est. | Map |
|---|---|---|---|---|---|---|
| Bridgeport | Ohio | E | 2 km | 1 mi | ~2m | 🗺 View |
| Wolfhurst | Ohio | W | 2 km | 1 mi | ~2m | 🗺 View |
| Lansing | Ohio | W | 3 km | 2 mi | ~3m | 🗺 View |
| Martins Ferry | Ohio | NE | 4 km | 3 mi | ~4m | 🗺 View |
| Bellaire | Ohio | S | 6 km | 4 mi | ~6m | 🗺 View |
| Neffs | Ohio | SW | 7 km | 4 mi | ~7m | 🗺 View |
Note: Distances are straight-line (great-circle) between city centers. Actual road distances and travel times will vary based on route and traffic conditions.
Some cities listed above (particularly those on islands or across large water bodies) may not be reachable by direct road — ferry or air travel may be required for those destinations.
Find exact latitude, longitude and elevation for the largest cities in Ohio, the home state of Brookside, along with each city's aerial distance from Columbus, Ohio's state capital. Handy reference data for routing, delivery zone mapping and GIS software.
| City Name | Latitude | Longitude | Elevation | Dist. from State Capital | Map & Coords |
|---|---|---|---|---|---|
| Columbus | 39.9612° N | -82.9988° W | 235 m | 0 km | 🗺 View Map |
| Cleveland | 41.4995° N | -81.6954° W | 199 m | 203 km | 🗺 View Map |
| Cincinnati | 39.1271° N | -84.5144° W | 191 m | 160 km | 🗺 View Map |
| Toledo | 41.6639° N | -83.5552° W | 186 m | 195 km | 🗺 View Map |
| Akron | 41.0814° N | -81.519° W | 291 m | 177 km | 🗺 View Map |
| Dayton | 39.7589° N | -84.1916° W | 225 m | 104 km | 🗺 View Map |
| Parma | 41.4048° N | -81.7229° W | 264 m | 193 km | 🗺 View Map |
| Canton | 40.799° N | -81.3785° W | 323 m | 166 km | 🗺 View Map |
| Youngstown | 41.0998° N | -80.6495° W | 259 m | 235 km | 🗺 View Map |
| Lorain | 41.4528° N | -82.1824° W | 186 m | 180 km | 🗺 View Map |
Pittsburgh International Airport IATA: PIT 65 km (40 mi) from Brookside |
The exact GPS location of Brookside gives business professionals, delivery operators and site planners a fixed reference point inside Ohio. These coordinates power satellite-based navigation, geofencing for local delivery fleets, sales territory boundaries and proximity checks for a new store or branch opening. All three coordinate formats — DD, DMS and DDM — are listed above for direct use across mapping tools. › Compare Ohio state-level map data
Decimal Degrees (DD) is the standard format used across web mapping APIs and dispatch software. DMS (Degrees Minutes Seconds) shows up in surveying records, printed maps and older GPS hardware still used by field crews. DDM (Degrees Decimal Minutes) is the go-to format for marine and aviation navigation. All three formats for Brookside are ready to paste straight into route planners, dispatch boards and geospatial software — see the full coordinate formats table above.
The satellite view of Brookside lets you check street layout, building density, land use and access roads before committing to a decision. Real estate teams use it to scout plots and assess neighborhood growth. Field service and utility crews use it to plan site visits, coverage zones and installation routes ahead of time. › View the full United States map
Brookside sits within Ohio, United States, in the North America region. Its position relative to other cities shapes trade flow, transport access and local market reach. Location intelligence from this mapping data supports territory planning, competitor proximity analysis and coverage-gap research. › Explore nearby cities
Transportation and dispatch teams use GPS coordinates of Brookside for last-mile delivery routing, warehouse placement analysis and freight corridor optimization. The city center provides a reliable starting point for distance calculations, zone pricing models and delivery time estimates across Ohio. › Browse every city in Ohio
Coordinates for Brookside in WGS84 decimal format are compatible with Google Maps, OpenStreetMap, Mapbox, ESRI ArcGIS and all major mapping platforms. Use them for geofencing, distance-based search, map overlays and location-based dashboards. Also useful for CRM territory assignment, field service scheduling and emergency response coordination in United States. › Country geolocation database
The GPS coordinates of Brookside are latitude 40.0706° and longitude -80.7609°. In directional format: 40.0706° N, 80.7609° W. These coordinates mark the center of Brookside in Ohio and work with Google Maps, OpenStreetMap and every major navigation app.
Brookside is a city in Ohio, United States, on the continent of North America. It falls within Belmont County. View its exact position on the satellite map above or check nearby cities for regional context.
In DMS (Degrees Minutes Seconds) format, Brookside sits at: Latitude 40° 4' 14" N and Longitude 80° 45' 39" W. This format is common in surveying records, printed maps and legacy GPS hardware still used by field crews on site visits.
Brookside has a population of approximately 614 people. This is roughly 0.005% of Ohio's total population. See the population rank and density figures above, or compare it against every city in Ohio.
The interactive satellite map of Brookside is embedded on this page and shows streets, buildings and terrain. You can also enter the GPS coordinates 40.0706, -80.7609 directly into Google Maps, Apple Maps or any navigation app to locate Brookside in Ohio. For broader context, explore the Ohio state map or nearby cities.
The nearest airport to Brookside is Pittsburgh International Airport (PIT), roughly 65 km away. See the Nearest Airport card in the sidebar for the exact distance in kilometers and miles.
Brookside is approximately 191 km (119 mi) from Columbus, the capital of Ohio, measured as a straight-line distance between city centers. See the Major Cities table above for distances from other cities in Ohio.
Brookside sits at an elevation of approximately 201 meters (659 feet) above sea level — see the Geographic Profile above. Compare it against other cities in the Major Cities table for Ohio.
The closest cities to Brookside include Bridgeport, Wolfhurst, Lansing. See the Geographic Intelligence panel above for the full list with distances, or the nearby cities tool for a complete breakdown.
Today in Brookside, sunrise is at 03:30 AM and sunset is at 05:25 PM, giving a day length of 13h 54m. See the Sunrise & Sunset panel above, calculated directly from Brookside's GPS coordinates and updated daily.
Brookside is approximately 4,461 km (2,772 mi) from the Equator, in the northern hemisphere. It's also about 6,880 km from the Prime Meridian. See the Global Position panel above for the full breakdown.
The antipodal point of Brookside — the spot exactly opposite it through the Earth's center — falls nearest to Augusta, Australia, roughly 1,546 km from the true antipode. Since about 71% of the Earth's surface is ocean, most antipodal points land in open water rather than on a named city.
Brookside is approximately 735 km (457 mi) W of Washington, the national capital of United States, measured as a straight-line distance between city centers. See the Distance to Capitals card above.
