Geo Countries
Campbellsville, Kentucky, United States – United States Flag

Current Date And Time In Campbellsville, United States

Thursday, 13 August 2026
02:50:29 PDT
State: Kentucky
Currency: United States Dollar (USD)
Timezone: UTC -08:00 (PDT)
Population: 11,237
District: Taylor County

🗺 Map of Campbellsville, Kentucky, United States – GPS Coordinates & Satellite View


Explore the interactive satellite map of Campbellsville, a city in Kentucky, United States, located in North America. This page provides precise GPS coordinates, latitude and longitude values, DMS (Degrees Minutes Seconds) and DDM (Degrees Decimal Minutes) formats for Campbellsville β€” all essential for geographic navigation, logistics planning, GIS integration and location intelligence workflows. View the live satellite map to explore terrain, streets and urban structure of Campbellsville.

Professional use cases: Supply chain & logistics routing • Delivery territory mapping • Real estate site analysis • Field operations & fleet management • Market research for regional expansion into North America • GIS platform data integration • Travel planning & proximity analysis • Strategic site selection for United States operations.

🌍 GPS Coordinates of Campbellsville, Kentucky

📍 LATITUDE
37.343°
North (N)
📍 LONGITUDE
85.342°
West (W)
🎯 Precision: WGS84 Datum • Format: Decimal Degrees • Accuracy: ±1 meter
Coordinate FormatLatitudeLongitude
Decimal Degrees (DD)37.3434° N85.3419° W
Signed Decimal Degrees37.3434-85.3419
Degrees Minutes Seconds (DMS)37° 20' 36" N85° 20' 31" W
Degrees Decimal Minutes (DDM)37° 20.6038' N85° 20.5144' W

☀️ Sunrise, Sunset & Day Length in Campbellsville Today

🔥 SUNRISE
03:54 AM
🌅 SUNSET
05:37 PM
⏳ DAY LENGTH
13h 42m
🌅 SOLAR NOON
10:46 AM
Calculated for today (13 Aug 2026) from Campbellsville’s GPS coordinates • times shown in local time.

🌐 Campbellsville’s Global Position — Equator, Prime Meridian & Antipode

📍 DISTANCE FROM EQUATOR
4,157 km
(2,583 mi) • Campbellsville is in the northern hemisphere
📍 DIST. FROM PRIME MERIDIAN
7,553 km
(4,693 mi) • Campbellsville is in the western hemisphere
🌐 ANTIPODAL COORDINATES
37.343° S, 94.658° E
The point exactly opposite Campbellsville through the Earth's core
If you dug a tunnel straight through the Earth's center from Campbellsville, you'd surface nearest to Gnarabup, Australia, about 1,871 km from the exact antipodal point — most of the Earth's surface opposite any given point is open ocean, so an exact land match is rare.

📊 Geographic Profile of Campbellsville

📍 Location Details

CityCampbellsville
StateKentucky (Commonwealth of Kentucky)
CountryUnited States
ContinentNorth America
DistrictTaylor County
Time Zone-10:00 to -05:00
Founded1817-01-01

📈 Area & Population

Population11,237
Area (km²)19.74 km²
Area (mi²)7.62 mi²
Pop. Density569.25 /km²
Elevation248 m / 814 ft
GPS (DD)37.3434, -85.3419

📊 Geographic Intelligence & Neighboring Cities

🗺 Neighboring Cities of Campbellsville

Nearby Cities Found: 6 cities
Parent State: Kentucky
Parent Country: United States

📈 City Size & Population Analysis

Population: 11,237
🏆 State Rank: #46 of 377 most populous in Kentucky
🏠 Share of Kentucky Population: 0.267%
📏 Built-Up Area: 19.74 km²
👥 Population Density: 569 people/km²

✈️ Distance & Travel Time to Nearby Cities

Straight-line (great-circle) distance from Campbellsville to each nearby city, calculated using the Haversine formula. Estimated travel time is based on a standard drive speed of 60 km/h. Use this data for delivery routing, courier zoning and last-mile logistics planning around Kentucky.

CityStateDirectionDistance (km)Distance (mi)Drive Est.Map
GreensburgKentuckySW17 km10 mi~17m🗺 View
SummersvilleKentuckyW18 km11 mi~18m🗺 View
LebanonKentuckyN26 km16 mi~26m🗺 View
ColumbiaKentuckyS27 km17 mi~27m🗺 View
LorettoKentuckyN33 km20 mi~33m🗺 View
LibertyKentuckyE36 km22 mi~36m🗺 View

Note: Distances are straight-line (great-circle) between city centers. Actual road distances and travel times will vary based on route and traffic conditions.
Some cities listed above (particularly those on islands or across large water bodies) may not be reachable by direct road — ferry or air travel may be required for those destinations.

🚗 Distance from Campbellsville to Capitals

STATE CAPITAL • Frankfort
104 km (65 mi)
NE of Campbellsville • ~1h 44m drive (straight-line)
NATIONAL CAPITAL • Washington
513 km (319 mi)
NW of Campbellsville • ~8h 33m drive (straight-line)

🏙️ GPS Coordinates of Major Cities in Kentucky

Find exact latitude, longitude and elevation for the largest cities in Kentucky, the home state of Campbellsville, along with each city's aerial distance from Frankfort, Kentucky's state capital. Handy reference data for routing, delivery zone mapping and GIS software.

City NameLatitudeLongitudeElevationDist. from State CapitalMap & Coords
Louisville38.2542° N-85.7594° W142 m78 km🗺 View Map
Lexington37.9887° N-84.4777° W295 m42 km🗺 View Map
Lexington-Fayette38.0498° N-84.4586° W305 m40 km🗺 View Map
Meads38.4126° N-82.7091° W185 m190 km🗺 View Map
Bowling Green36.9903° N-86.4436° W161 m193 km🗺 View Map
Owensboro37.7742° N-87.1133° W120 m202 km🗺 View Map
Covington39.0837° N-84.5086° W155 m103 km🗺 View Map
Richmond37.7479° N-84.2947° W289 m71 km🗺 View Map
Georgetown38.2098° N-84.5588° W258 m27 km🗺 View Map
Florence38.9989° N-84.6266° W282 m91 km🗺 View Map
Neighbouring Countries
✈️ Nearest Airport
Louisville Muhammad Ali International Airport
IATA: SDF
98 km (61 mi) from Campbellsville
States By Alphabets

πŸ’¬ Was this information helpful?

Help us improve our country profiles. Your feedback helps enhance data accuracy and user experience.

🌍 Campbellsville Map Guide – Location Intelligence & Geographic Reference

📍 Why GPS Coordinates of Campbellsville Matter

The exact GPS location of Campbellsville gives business professionals, delivery operators and site planners a fixed reference point inside Kentucky. These coordinates power satellite-based navigation, geofencing for local delivery fleets, sales territory boundaries and proximity checks for a new store or branch opening. All three coordinate formats β€” DD, DMS and DDM β€” are listed above for direct use across mapping tools. › Compare Kentucky state-level map data

📈 Coordinate Formats for Campbellsville Mapping

Decimal Degrees (DD) is the standard format used across web mapping APIs and dispatch software. DMS (Degrees Minutes Seconds) shows up in surveying records, printed maps and older GPS hardware still used by field crews. DDM (Degrees Decimal Minutes) is the go-to format for marine and aviation navigation. All three formats for Campbellsville are ready to paste straight into route planners, dispatch boards and geospatial software — see the full coordinate formats table above.

🗺 Satellite Map Uses for Campbellsville

The satellite view of Campbellsville lets you check street layout, building density, land use and access roads before committing to a decision. Real estate teams use it to scout plots and assess neighborhood growth. Field service and utility crews use it to plan site visits, coverage zones and installation routes ahead of time. › View the full United States map

🌎 Regional Position of Campbellsville in Kentucky

Campbellsville sits within Kentucky, United States, in the North America region. Its position relative to other cities shapes trade flow, transport access and local market reach. Location intelligence from this mapping data supports territory planning, competitor proximity analysis and coverage-gap research. › Explore nearby cities

🚚 Logistics & Route Planning with Campbellsville Coordinates

Transportation and dispatch teams use GPS coordinates of Campbellsville for last-mile delivery routing, warehouse placement analysis and freight corridor optimization. The city center provides a reliable starting point for distance calculations, zone pricing models and delivery time estimates across Kentucky. › Browse every city in Kentucky

💻 Using Campbellsville Location Data in Business Platforms

Coordinates for Campbellsville in WGS84 decimal format are compatible with Google Maps, OpenStreetMap, Mapbox, ESRI ArcGIS and all major mapping platforms. Use them for geofencing, distance-based search, map overlays and location-based dashboards. Also useful for CRM territory assignment, field service scheduling and emergency response coordination in United States. › Country geolocation database

📊 How to Use Campbellsville Map Data

🔠 Copy & Use CoordinatesUse the latitude and longitude of Campbellsville directly in Google Maps, navigation apps, mapping software or API integrations. Three coordinate formats are listed for maximum compatibility across tools.
🚛 Explore Nearby CitiesUse the nearby cities tool to find every town and city close to Campbellsville. Ideal for coverage planning, cross-town logistics and regional market research.
🏝 Compare Kentucky CitiesAccess the full city directory for Kentucky ranked by population, area and density for precise site comparisons and territory planning.

❓ Frequently Asked Questions About Campbellsville Location & Map

📍 What are the GPS coordinates of Campbellsville?

The GPS coordinates of Campbellsville are latitude 37.3434° and longitude -85.3419°. In directional format: 37.3434° N, 85.3419° W. These coordinates mark the center of Campbellsville in Kentucky and work with Google Maps, OpenStreetMap and every major navigation app.

🌎 Where is Campbellsville located?

Campbellsville is a city in Kentucky, United States, on the continent of North America. It falls within Taylor County. View its exact position on the satellite map above or check nearby cities for regional context.

📈 What are the DMS coordinates of Campbellsville?

In DMS (Degrees Minutes Seconds) format, Campbellsville sits at: Latitude 37° 20' 36" N and Longitude 85° 20' 31" W. This format is common in surveying records, printed maps and legacy GPS hardware still used by field crews on site visits.

👥 What is the population of Campbellsville?

Campbellsville has a population of approximately 11,237 people. This is roughly 0.267% of Kentucky's total population. See the population rank and density figures above, or compare it against every city in Kentucky.

🗺 How can I view Campbellsville on a satellite map?

The interactive satellite map of Campbellsville is embedded on this page and shows streets, buildings and terrain. You can also enter the GPS coordinates 37.3434, -85.3419 directly into Google Maps, Apple Maps or any navigation app to locate Campbellsville in Kentucky. For broader context, explore the Kentucky state map or nearby cities.

✈️ What is the nearest airport to Campbellsville?

The nearest airport to Campbellsville is Louisville Muhammad Ali International Airport (SDF), roughly 98 km away. See the Nearest Airport card in the sidebar for the exact distance in kilometers and miles.

🚗 How far is Campbellsville from Frankfort?

Campbellsville is approximately 104 km (65 mi) from Frankfort, the capital of Kentucky, measured as a straight-line distance between city centers. See the Major Cities table above for distances from other cities in Kentucky.

⛰️ What is the elevation of Campbellsville?

Campbellsville sits at an elevation of approximately 248 meters (814 feet) above sea level — see the Geographic Profile above. Compare it against other cities in the Major Cities table for Kentucky.

🗺 Which cities are closest to Campbellsville?

The closest cities to Campbellsville include Greensburg, Summersville, Lebanon. See the Geographic Intelligence panel above for the full list with distances, or the nearby cities tool for a complete breakdown.

☀️ What time does the sun rise and set in Campbellsville today?

Today in Campbellsville, sunrise is at 03:54 AM and sunset is at 05:37 PM, giving a day length of 13h 42m. See the Sunrise & Sunset panel above, calculated directly from Campbellsville's GPS coordinates and updated daily.

📍 How far is Campbellsville from the Equator?

Campbellsville is approximately 4,157 km (2,583 mi) from the Equator, in the northern hemisphere. It's also about 7,553 km from the Prime Meridian. See the Global Position panel above for the full breakdown.

🌐 What is on the exact opposite side of the Earth from Campbellsville?

The antipodal point of Campbellsville — the spot exactly opposite it through the Earth's center — falls nearest to Gnarabup, Australia, roughly 1,871 km from the true antipode. Since about 71% of the Earth's surface is ocean, most antipodal points land in open water rather than on a named city.

🚗 How far is Campbellsville from Washington, the capital of United States?

Campbellsville is approximately 513 km (319 mi) NW of Washington, the national capital of United States, measured as a straight-line distance between city centers. See the Distance to Capitals card above.